Rockwell Automation 2364E Non-Regenerative DC Bus Supply Unit (NRU) - Manual (Page 83)

Publication 2364E-5.01 April 2002
NRU Details C-3
MCC AC Input Entry Area MCC top plates are removable for the punching of AC input entry
holes. Each MCC has a top plate. Please refer to the following
illustration for information on available entry area and information
given in Chapter 9, or the installation instructions.
Table B: MCC Input Entry Area
Figure 4
Area Available for Conduit Entry in Circuit Breaker Section
DC Bus Current
(A DC) NRU Current
Code
Dimension "A" in Figure 4 Dimension "B" in Figure 4
180, 350 A, B 25.00" 22.00"
900 C 30.00" 27.00"
1500, 2000, 2500,
3000
D, E, F, G 30.00" 27.00"
(Back of Enclosure)
PE
Area Available For
Conduit Entry
1.50" B
A
20.00"
1.25"
9.00"
(Front of Enclosure)