Rockwell Automation 4100 AEC Absolute Encoder Converter Installation - Manual (Page 31)

Publication 4100-UM052B-EN-P - October 2001
Installation & Hook-Up 23
The following is the connector pin numbering scheme for the SSI
connector as viewed with the AEC mounted in its normal position.
SSI Connector Pin Numbering
A B
10 5
9 4
8 3
7 2
6 1
ATTENTION
!
Wiring the connector for the wrong transducer power can
result in improper operation or damage to the position
transducer.
IMPORTANT
Pins 1 through 3 are reserved for transducer power
output. Only one of these can be in use at a time. It is
your responsibility to determine the power requirement
of the transducer you are connecting to the AEC and to
use the pin that corresponds to that requirement.