Rockwell Automation 4100 AEC Absolute Encoder Converter Installation - Manual (Page 36)

Publication 4100-UM052B-EN-P - October 2001
28 Installation & Hook-Up
The pin layout and functionality for this connector are shown in the
following table.
The following table shows the power supply connector pin
numbering, as seen with the AEC mounted in its normal position.
The following diagram illustrates the power connections for the AEC.
Figure 12 Wiring diagram for connecting the power cable to the connector
Power Supply Pin Functions
Power Supply
Pin Number Pin Function
1 Supply Common
2 Supply +
Power Supply Pin Numbering
Power
2
1
2
1
Supply +
To 18-36V DC
Power Supply
Supply Return
IMPORTANT
Anchor the cable so that no more than 2 feet of cable is
left unsupported. The excessive weight of an unanchored
cable could pull the plug out of the connector.