Rockwell Automation 1794-IP4 Series B FLEX I/O PULSE COUNTER User Manual - Manual (Page 38)

3–7 Programming Your Pulse Counter Module
Publication 1794ĆUM016B-EN-P - August 2002
Program Action
BTR ERROR BIT
B3:0
12
BTR ENABLE BIT
B3:100
15
MOV
MOVE
SOURCE
DEST
B3:100
M0:1.100
1000000010000000
0011
This BTW control word is moved to the M0 file
for the scanner module while the BTW is in
progress until the enable, done and error bits
are turned off.
?<
BTR DONE BIT
B3:0
13
BTR CONTROL
BTW ERROR BIT
B3:10
12
BTW ENABLE BIT
B3:110
15
MOV
MOVE
SOURCE
DEST
B3:110
M0:1.200
0012
?<
BTW DONE BIT
B3:10
13
BTW CONTROL
This BTR control word is moved to the M0 file
for the scanner module while the BTR is in
progress until the enable, done and error bits
are turned off
0013 END
00000000000000