Rockwell Automation 6181F_P Series E Integrated Display Computers User Manual - Manual (Page 38)

38 Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014
Chapter 4 Component Replacement
Standard Computers
Follow these steps to remove the rear cover.
1. Follow the steps for Pre-configuration on page 36 .
2. Loosen the one screw that secures the rear cover (A).
3. Slide the cover downward to release the inner tabs from the chassis (B).
4. Detach the rear cover from the chassis (C).
5. After installing, replacing, or upgrading internal computer components,
reinstall the cover as detailed in Reinstall the Cover on page 38 .
Reinstall the Cover The procedure for reinstalling the rear cover is different for the computer models.
Performance and Non-display Computers
Follow these steps to reinstall the rear cover (the performance computer is
shown).
1. Follow steps 1…3 for Post-configuration on page 37 .
2. Reattach the rear cover to the chassis (A).
3. Close the cover (B).
A
B
C