Rockwell Automation 6181F_P Series E Integrated Display Computers User Manual - Manual (Page 61)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 61
Chapter
6
Maintenance
Chapter Objectives This chapter provides information on the following topics:
• Clean the Computer
• Backlight Assembly Disposal
Clean the Computer It is important to maintain your computer by cleaning the display, heat sink and
vent holes, and removing grease or paint.
Clean the Integrated Display
Perform the following steps to clean the display.
1. Disconnect power from the computer at the power source.
2. Clean the display with a mild soap or detergent by using a clean sponge or a
soft cloth.
3. Dry the display with a chamois or moist cellulose sponge to avoid water spots.
ATTENTION: If the computer has a touch screen, it is possible for screen
objects to activate during equipment wash-downs if the computer is
turned on.
ATTENTION: Use of abrasive cleansers or solvents can damage the
display window. Do not scrub or use brushes.