Rockwell Automation 6181F_P Series E Integrated Display Computers User Manual - Manual (Page 39)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 39
Component Replacement Chapter 4
4. Tighten the three screws to secure the rear cover (C).
5. Follow steps 4 and 5 for Post-configuration on page 37 .
Standard Computers
Follow these steps to reinstall the rear cover.
1. Follow steps 1…3 for Post-configuration on page 37 .
2. Insert the rear cover tabs on the slats lining the internal slot bay (A).
3. Slide the cover upward to engage the tabs to the chassis (B).
4. Tighten the one screw to secure the rear cover (C).
5. Follow steps 4 and 5 for Post-configuration on page 37 .
C
B
C
C
A
A
C
B
A