Rockwell Automation 1758 DataSite Accelerator Toolkit User Manual
Page 30
Advertising
30
Publication IASIMP-QS008A-EN-P - March 2009
Chapter 3 DataSite and Logix Integration
11. Click PC Communication.
a. Select UDP or
TCP/Server from the
Type Select pull-down
list.
b. Type the IP address,
192.168.10.93 that you
just downloaded to the
DataSite unit.
c. Click Apply.
d. Click OK when you see
Communication port
opened successfully.
12. Connect your computer
to the DataSite unit using
an Ethernet crossover
cable.
13. Click Flo Communication.
a. Verify the IP address is
192.168.10.93.
b. Click Download.
c. Click OK when you see
the Download
successful message.
The IP address of the DataSite unit was set successfully and now uses Ethernet communication.
Ethernet Crossover Cable
Advertising