Rockwell Automation 1758 DataSite Accelerator Toolkit User Manual
Page 41
Advertising
Publication IASIMP-QS008A-EN-P - March 2009
41
DataSite and Logix Integration Chapter 3
18. From the Send File dialog
box:
a. Click Browse to locate
WATTCP.CFG, then
click Open.
b. Select Zmodem from
the Protocol list.
c. Press Send.
A progress bar shows the
status of the transfer.
19. Press Shift+? to display
the Network menu; then
press M followed by
Shift+? to return the main
menu.
The ProSoft Modbus
module is now
configured.
20. Close the HyperTerminal
dialog box.
21. Cycle power to the
ProSoft module by
pulling it from the chassis
and re-inserting it.
This registers the new IP
address.
Advertising