Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 83)

Publication IASIMP-QS008A-EN-P - March 2009 83
DataSite to FactoryTalk View ME Master Appendix A
Load KEPServerEnterprise File
Follow these steps to load a KEPServer Enterprise .pfe file that contains Modbus addresses of the
parameters to be polled and displayed on the PanelView Plus 600 HMI terminal.
1. From the DataSite Accelerator Toolkit CD, choose DataSite to FactoryTalk View ME
Master>HMI Application files.
2. Copy ModbusSerial.pfe from the CD to the default project folder for KEPServerEnterprise.
3. Launch KEPServerEnterprise V4.0.
4. Choose Open from the File menu, then locate and open the ModbusSerial.pfe file.
C:\Program Files\KEPServerEnterprise\Projects