Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 59)

Publication IASIMP-QS008A-EN-P - March 2009 59
FactoryTalk View Integration Chapter 5
Configure Target Communication
The Runtime (Target) tab displays the offline configuration from the perspective of the device that
is running the application and comprises the topology that is loaded in the PanelView Plus
terminal. In this example, the PanelView Plus terminal communicates to the same
ControlLogix L63 controller via Ethernet communication.
Follow these steps to configure target communication.
1. Select the Design (Local) tab in the Communication Setup window.
2. Click Copy from Design to Runtime.
A dialog box prompts you to confirm
the operation.
3. Click Yes.