Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 32)

32 Publication IASIMP-QS008A-EN-P - March 2009
Chapter 3 DataSite and Logix Integration
Configure the ControlLogix Controller Properties
Follow these steps to configure your ControlLogix L63 controller.
1. Apply power to your
ControlLogix chassis.
2. Connect your computer
and 1756-ENBT Ethernet
module to the Ethernet
switch using Ethernet
straight-through cables.
3. Choose Controller
Properties from the Edit
menu to open the
Controller Properties
dialog box.
4. Click the General tab.
a. Click the Change
Controller button to
select the controller
that matches your
hardware.
This example uses
1756-L63 revision 16.
b. Change the controller
Name as desired.
c. From the Chassis Type
pull-down list, select
the catalog number for
your chassis.
d. Set the slot number to
0 to indicate the
1756-L63 controller
resides in slot 0.
e. Click OK.
Ethernet Straight-through Cables
192.168.10.95 1756-L63 ControlLogix Controller
with 1756-ENBT Ethernet/IP Module
EN
B
T
Pr
oS
oft
Ethernet Switch
ENBT Module
192.168.10.90
TIP
Slot 0 is reserved for the 1756-L63 module. Slot 1 is reserved
for the 1756-ENBT module. Slot 2 is reserved for the ProSoft
Modbus TCP/IP module.