Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 64)

64 Publication IASIMP-QS008A-EN-P - March 2009
Chapter 5 FactoryTalk View Integration
Run the Project on PanelView Plus Terminal
The (.mer) runtime file is now stored in the PanelView Plus terminal so you are ready to run the
project on the terminal.
Follow these steps to run your project on the PanelView Plus terminal.
1. Verify that the PanelView
Plus is connected as
shown on page
42 and
that it is receiving power.
2. Press Load Application
[F1] in the FactoryTalk
View ME Station dialog
box.
The Load Application
dialog box opens.
3. Use the up/down arrows
to scroll through the list
of applications and select
DataSite_ME_CLX.mer.
4. Press Load [F2].