Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 91)

Publication IASIMP-QS008A-EN-P - March 2009 91
DataSite to FactoryTalk View ME Master Appendix A
Select a Different COM Port for the Serial DF1 Driver
If the variable data appears as asterisks on the PanelView Plus terminal, you need to change the
COM port used by the serial DF1 driver. If data appears correctly on the terminal, you can skip
this section.
Follow these steps to select a different COM port for the serial DF1 driver.
1. Press Terminal Settings
[F4] in the FactoryTalk
View ME Station dialog
box.
2. Select Networks and
Communications, then
press the Enter button.