Rockwell Automation 1758 DataSite Accelerator Toolkit - Manual (Page 70)

70 Publication IASIMP-QS008A-EN-P - March 2009
Chapter 6 System Validation
3. Select MeterRun0 on the left side of the dialog box.
4. Click Calculation Test and check all three boxes.
a. Type 800 for Static
Pressure.
b. Type 80 for Temperature.
c. Type 70 for Differential Pressure.
d. Click OK.
TIP
You can optionally repeat steps 3 and 4 for Meter Run1 through Meter Run7.