Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 11)

Installing RSView32 Runtime

1–5
If you removed the activation or if you are installing RSView32
Runtime for the first time, insert the Activation disk in the diskette
drive and click Activate. For details about activation, see
“Activating RSView32 Runtime” on page 1-5.
6. When installation is complete, restart Windows. If you choose not
to restart Windows now, be sure to restart it before running
RSView32 Runtime for the first time.
If you plan to use RSView32 as an OPC server, you must configure
Microsoft
® Distributed COM (DCOM). For instructions see the
RSView32 Help.
Installation summary
The default installation does the following:
installs RSView32 Runtime in the folder \Program Files\Rockwell
Software\RSView
adds a Rockwell Software\RSView32 folder to your list of
programs. This folder contains the shortcut for RSView32
Runtime
Ordering RSView32 Runtime on disks
RSView32 Runtime is available on 3.5–inch disks. To order disks,
contact your local authorized Allen–Bradley
® distributor or your local
Allen–Bradley sales office.
Activating RSView32 Runtime
Rockwell Software Inc. uses activation files to activate its Windows–
based software packages. You can activate RSView32 Runtime by
using FactoryTalk Activation software to download and transfer
activation files.