Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 56)

RSView32 commands

A–25
screen, using the file called Names to replace tag placeholders with tag
names.
Display Picture /H300 /W400 /CC
Makes the graphic display called Picture 300 pixels high and 400 pixels
wide, and positions the display in the center of the screen.
Example: Replacing tag placeholders in a graphic display
If a graphic display called Canning uses three tag placeholders, and
you want to substitute tags for canning corn, you would type:
Display Canning /Tcorn\off,corn\on,corn\weight
Placeholder #1 is replaced by the corn\off tag, placeholder #2 is
replaced by the corn\on tag, and placeholder #3 is replaced by the
corn\weight tag.
Download Download
Writes the value in the selected input field of the active graphic display
to the programmable controller or server.
This command operates on the active graphic display. If no display is
active, this command is ignored.
Ctrl–PgDn also downloads the value in the selected input field.
The Enter key also downloads the value in the selected input field.
However, if the /E parameter is used with the Display command, the
Enter key is disabled, unless the Display On-Screen Keyboard option
is selected (in the Behavior tab of the Display Settings dialog box). If
the selected input field is a recipe field, pressing the Enter key opens
the Recipe dialog box.