Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 55)

A–24

RSView32 Runtime User’s Guide
[/Ttag_name] One or more tags, separated by commas and no
spaces, to be substituted for placeholders in the
display. If the display does not contain
placeholders, do not use this parameter.
[/Hnnn] Specifies the height of the graphic display in pixels.
[/Wnnn] Specifies the width of the graphic display in pixels.
[/Min] Runs the graphic display minimized (as an icon).
[/Max] Runs the graphic display maximized (full–screen
size).
[position] Specifies the position of the window as follows:
/Q1
top right corner
/Q2 top left corner
/Q3 bottom left corner
/Q4 bottom right corner
/CT centered in the top half
/CB centered in the bottom half
/CL centered on the left side
/CR centered on the right side
/CC centered in the screen
/Xnnn nnn pixels from the left edge
/Ynnn nnn pixels down from the top
Examples: The Display command
Display Sample
The first time the graphic display called Sample is opened, it is
positioned and sized as specified in its Display Settings dialog box.
When the display is closed, its size and position will be saved, so the
next time it is opened it will be the same size and position as when it
was last closed.
Display Picture /PNames /CB
Positions the graphic display called Picture in the bottom half of the