Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 48)

RSView32 commands

A–17
DataLogNewFile DataLogNewFile <parameter>
Creates a new data log file for the specified model or for all models, on
the path RSView32 is currently logging to (either the primary path or
the backup path). If RSView32 is logging to an ODBC database,
RSView32 logs an End snapshot and then a Begin snapshot when you
issue this command.
<file> The name of the data log model, without a file
extension.
* Creates new files for all models that are currently
running.
DataLogOff DataLogOff <parameter>
Stops data logging for a specified model or stops data logging for all
models.
<file> The name of a data log model, without a file
extension.
* Stops data logging for all models.
DataLogOn
DataLogOn <file>
Starts data logging for the specified model.
<file> The name of a data log model, without a file
extension.
To have data logging automatically start when a project starts, open
the Startup editor, click the Data Logging check box and specify a file.