Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 40)

RSView32 commands

A–9
[/HTime– The time stamp associated with the alarm
stamp] transaction, in the format: <HH:MM:SS>[Date]:
<HH:MM:SS>The 24–hour military format for
time. You must use this format for
indicating the time.
[Date] A date that can be specified in
the same format as the Windows ® date
style configured for your computer. If
you want to use a VBA program to
set the date, you can use any date
format that conforms to the MFC
class COleDateTime. If you do not
specify a date, the current date is
used.
If you specify a time stamp for an alarm, the alarm
may not appear as the most recent alarm in the
\system\AlarmBanner tag, even if it was logged after
an alarm with a more recent time stamp.
[/LLog The alarm message, up to 132 characters long, to be
Message] logged to disk and/or printer. The log message can
contain any of the placeholders available to alarm
messages. If you do not specify a log message, the
user default message is used.
AlarmLogOff AlarmLogOff
Stops alarm logging.
AlarmLogOn AlarmLogOn
Starts alarm logging.
Alarm logging is on by default.