Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 60)

RSView32 commands

A–29
Help Help [word] [/Ffile]
Displays a Windows help file.
[word] A word you want to search for in the help file. When
you specify a search word, the command will either:
open the help file at a topic if the word uniquely
identifies that topic
open a list of related topics
[/Ffile] The name of a Windows help file. The default help
file is for RSView32.
If no search word is specified, the command opens the RSView32
help file and displays the Contents topic.
Identify Identify [tag_name]
Runs the command or macro associated with the named tag, whether
or not the tag is in alarm.
[tag_name] The name of the tag in alarm. The command or
macro associated with this tag will run. If no tag
name is specified, the Identify command runs the
command or macro associated with the most recent,
most severe unacknowledged alarm.
[tag] Specifying the word “tag” inside square brackets runs
the identify command for the tag associated with the
highlighted object in the active graphic display.
Running the Identify command is not the same as acknowledging an
alarm.
When many alarms are occurring rapidly, do not use the Identify
command without a tag name. A new alarm could become the
current alarm before the Identify command runs, and the command
or macro that runs might not be the one expected.
IMPORTANT