Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 47)

A–16

RSView32 Runtime User’s Guide
DataLogChangeR
ate
DataLogChangeRate <file> <value> [unit]
Changes the periodic log rate. The change affects the current
logging session only, and won’t be retained if data logging is stopped
and restarted.
<file> The name of a data log model, without a file
extension.
<value> The numeric portion of the time interval for the log
rate. For example, if you want to log data every 20
seconds, the value is 20. The value must be an
integer from 1 to 64,000.
[unit] The time unit of the log rate: hundredths, tenths,
seconds, minutes, hours, or days. If you omit the
[unit] parameter, the default is seconds.
DataLogMerge
ToPrimary
DataLogMergeToPrimary <parameter>
Moves data from the secondary or backup path to the primary path
or ODBC database, for a specified model or for all models that are
currently running.
<file> The name of a data log model, without a file
extension.
* Moves data for all models that are currently
running.
You can use the DataLogMergeToPrimary<file> command whether
or not the specified model is running. If a model is running when
you issue the DataLogMergeToPrimary command, RSView32
switches back to the primary path or ODBC database. If a model
uses the .dbf format, RSView32 moves all files on the secondary
path (including the current file set) to the primary path, begins a new
file set on the primary path, and continues logging to the new file
set. If a model uses the ODBC format, RSView32 merges the
ODBC backup files into the ODBC database and continues logging
to the ODBC database.