Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 64)

RSView32 commands

A–33
LTagSubstitute LTagSubstitute [language] [sheet]
Use this command to substitute string values of all the tags specified
in the selected spreadsheet with the selected language.
[language] The selected language name.
[sheet] The spreadsheet name of Excel file.
Space is not allowed in Excel spreadsheet name.
The Excle file is created automatically with the project name and
located in the current project folder by default. Its name and
location can not be changed, or the commands LTagSubstitute and
LInsertString will not work.
Monitor
Monitor [file][/Xnnn] [/Ynnn][/Ttag_name]
In edit mode, without the [file] parameter, opens the Tag Monitor
editor; with the [file] parameter, opens the specified tag monitor file.
In run mode, with the [file] parameter, opens the specified tag
monitor file. With the [/Ttag_name] parameter, opens a tag monitor
containing the specified tags.
[file] The name of a tag monitor file without a file
extension.
[/Xnnn] Positions the tag monitor nnn pixels from the left
edge of the screen. The width depends on screen
resolution.
[/Ynnn] Positions the tag monitor nnn pixels from the top
edge of the screen. The height depends on screen
resolution.
[/Ttag_name] The name of a tag. You can use wildcards and can
name more than one tag. Precede each tag name
with a space and /T.
You can monitor up to 100 tags in one file.