Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 43)

A–12

RSView32 Runtime User’s Guide
This parameter allows frequent exports to the
database without having to connect every time.
Once the connection is established, RSView32
waits the specified time and, if another command is
received to export data, the command is executed
and the wait timer is reset. If no command is
received within the wait time, the connection is
closed.
[/Uuser_name] A user ID that is valid on the data source.
[/Ppassword] A password that is valid on the data source.
AlarmOff
AlarmOff
Stops alarm monitoring. Once this command has run, it displays a
message indicating that alarm monitoring has stopped.
AlarmOn AlarmOn [/H]
Starts alarm monitoring. Once this command has run, it displays a
message indicating that alarm monitoring has started.
[/H] Turns on handshaking the moment alarm
monitoring starts and sets the handshake bit for
any tags in alarm at that moment.
To have alarming start when a project starts, open the Startup editor
and click the Alarming check box.
AlarmPrintOff AlarmPrintOff
Stops alarms from printing.
AlarmPrintOn AlarmPrintOn
Starts alarm printing.
Alarm printing is on by default.