Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 82)

RSView32 commands

A–51
Upload Upload
In a graphic display, reads a value from the programmable controller
or server and displays it in the selected input field.
This command operates on the active graphic display. If no display is
active, this command is ignored.
Ctrl–PgUp also uploads the value to the selected input field.
UploadAll UploadAll
In a graphic display, reads values from the programmable controller or
server and displays them in all the input fields.
This command operates on the active graphic display. If no display is
active, this command is ignored.
PgUp also uploads all the values to the input fields.
VBAExec VBAExec <program_name> [parameters]
Runs a VBA program.
<program The name of the program as specified in the Sub
_name> statement.
[parameters] Any argument that a particular program requires.
Separate arguments with commas.