Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 17)


2–1
Chapter 2
Running a project
This chapter outlines:
the steps for setting up and running your project
how to add files to a project
how to stop a project
Setting up and running your project
Once you have installed RSView32 ™ Runtime on the target computer,
you are ready to set up and run the project you have created in
RSView32 Works.
Summary of steps
1. Move the project to the target computer.
2. If the target computer is configured for a different locale than the
development computer, specify time, date, and number formats.
3. Start RSView32 Runtime.
4. Open the project.
5. Set up the channels, OPC ® server, or DDE server.
6. If applicable, change the path for any files that are outside of the
project directory.
7. Run the project.
Each of these steps is discussed in detail on the following pages.