Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 44)

RSView32 commands

A–13
AlarmViewer AlarmViewer
Opens the Alarm Log Viewer.
AppAbort
AppAbort <application>
Closes the specified Windows application.
<application> The name of a Windows application exactly as it
appears in the application’s title bar.
Example: The AppAbort command
If Notepad is open and contains an untitled file, the Notepad title bar
will read Untitled – Notepad. To close Notepad you must type exactly
what’s in the Notepad title bar as follows:
AppAbort Untitled - Notepad
AppActivate AppActivate <application>
Activates (pulls forward) the specified Windows application. The
application must already be running. (You can use the AppStart
command to start the application.)
<application> The name of the Windows application you want to
activate. Typically, this is the name that appears in the
application’s title bar.