Rockwell Automation RSView32 Runtime Users Guide - Manual (Page 70)

RSView32 commands

A–39
reflected in the printout. To ensure the printout is up-to-date, save the
display before printing it.
Project
Project
Obsolete. Use ProjectHide, ProjectRun, ProjectShow, or ProjectStop.
ProjectHide
ProjectHide
Hides the Project Manager so it is not visible on the screen.
Ctrl-Alt-P also hides the Project Manager if it is visible.
ProjectRun
ProjectRun
Starts running the project. This is the same as choosing the Run
Project button in the Run Mode tab of the Project Manager.
ProjectShow ProjectShow
Displays a hidden Project Manager.
Ctrl-Alt-P also shows the Project Manager if it is hidden.
ProjectStop ProjectStop
Stops running the project. This is the same as choosing the Stop
Project button in the Run Mode tab of the Project Manager.
PullForward PullForward <file>
Moves the specified graphic display in front of all other windows. If
the specified graphic display is of the Replace or Overlay type, and a
display of the On Top type is open, PullForward positions the
specified display behind the back-most On Top display and gives the
specified display focus.
<file> The name of an open graphic display file without a
file extension.