Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 10)

10 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
Preface
Parts List
You need these parts to complete the tasks described in this quick start.
For a list of parts required to complete the prerequisite tasks listed in Table 1 on page 5 , see the documentation
describing those tasks.
Additional Resources
Use the resources listed in this table for more information when using PowerFlex 525 drives over an EtherNet/IP
network in a Logix5000 controller project.
You can view or download publications at http://www.rockwellautomation.com/literature . To order paper
copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales
representative.
✓ Quantity Cat. No. Description
1 25B-
xyyyN1z4
PowerFlex 525 AC drive
1 1585J-M8PBJM-2 RJ45 to RJ45 Ethernet cable
Resource Description
PowerFlex 525 Adjustable Frequency AC Drive User Manual,
publication
520-UM001
Provides basic information needed to install, start up, program, and troubleshoot
the PowerFlex 525 AC drive.
EtherNet/IP Modules in Logix5000 Control Systems,
publication
ENET-UM001
Describes how to install, configure, and operate EtherNet/IP modules.
ControlLogix
®
Controllers Common Procedures Programming
Manual, publication 1756-PM001
Provides details about adding and configuring modules, establishing
communication, and writing ladder logic.
Industrial Automation Wiring and Grounding Guidelines,
publication
1770-4.1
Provides general guidelines for installing a Rockwell Automation® industrial system.
Product Certifications website, http://www.ab.com Provides declarations of conformity, certificates, and other certification details.