Controller and other component quick starts, Use each chapter – Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start User Manual
Page 7
Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
7
Preface
Controller and Other Component Quick Starts
This quick start describes how to use one device on one network in a Logix5000 control system. Typically,
though, a Logix5000 control system includes more than the controller and one device on one network.
For example, if a Logix5000 control system operates on an EtherNet/IP network, in addition to a controller,
power supply, and communication modules, the system can use remote I/O modules, drives, and graphic
terminals.
Other quick starts describe how to use different devices on different networks in Logix5000 control systems. For
more information, see the Integrated Architecture™: Logix5000 Control Systems Quick Starts Quick Reference,
publication
Use Each Chapter
The beginning of each chapter contains the following sections of information that must be read before you begin
working in the chapter:
•
Before You Begin
- This section lists the tasks you must complete before starting the chapter.
•
What You Need
- This section lists the components that are required to complete the tasks in the chapter.
•
Follow These Steps
- This section illustrates the steps in the current chapter.