Additional resources – Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start User Manual
Page 30
Advertising
30
Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
Chapter 2 Add a PowerFlex 525 Drive to a Controller Project
9.
Change the Stop tag to 1.
The display on the drive shows a speed
decrease until the drive reaches 0.00 Hz.
10.
Change the Stop tag back to 0.
11.
Go Offline.
By starting and stopping the drive, you verified the following conditions exist in your application:
•
The controller is correctly communicating with the drive.
•
The drive can receive and execute simple commands.
Additional Resources
For a list of additional resources that can assist you when adding the drive to a controller project, see page
.
Advertising