Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 19)

Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013 19
Chapter
2
Add a PowerFlex 525 Drive to a Controller Project
In this chapter, you add a PowerFlex 525 drive to a controller project and configure the drive. You also download
the project to the controller so you can verify communication with the drive.
Before You Begin
You must complete these tasks before using this chapter:
• The tasks described in Before Using This Publication on page 5 .
• Prepare the PowerFlex 525 drive as described in Chapter 1, Prepare the PowerFlex 525 Drive Hardware on
page
11 .
What You Need
You need RSLogix 5000 software or the Studio 5000 Logix Designer application to complete the tasks described
in this chapter.