Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 23)

Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013 23
Add a PowerFlex 525 Drive to a Controller Project Chapter 2
11. Click the Drive tab.
12. From the device toolbar, click Upload.
A Connection Browser appears.
13. Navigate to and select the desired drive.
14. Click OK.
If you have not previously connected to a
PowerFlex 525 drive, a Creating Device
Database File dialog box appears and
shows the progress of the database
creation. No action is necessary.
A Connecting dialog box appears and
shows the progress of the connection.
IMPORTANT If your computer already has a
database, the software does not
create a new one.