Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 11)

Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013 11
Chapter
1
Prepare the PowerFlex 525 Drive Hardware
In this chapter, you learn how to complete the following tasks:
• Mount and wire power to a PowerFlex 525 AC drive.
• Configure EtherNet/IP communication for the drive.
Before You Begin
You must complete these tasks before using this chapter:
• The tasks described in Before Using This Publication on page 5 .
The example controller project used in this chapter uses a CompactLogix 5370 L3 controller.
What You Need
This table lists the products you need to complete the tasks described in this chapter.
Quantity Cat. No. Description
1 25B-
xyyyN1z4
PowerFlex 525 AC drive
1 1585J-M8PBJM-2 RJ45 to RJ45 Ethernet cable