Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 25)

Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013 25
Add a PowerFlex 525 Drive to a Controller Project Chapter 2
Download the Project and Connect to the Drive
1. Click the Controller Status icon and
choose Download.
The Download Warning dialog box appears.
2. Click Download.
The controller project goes online with
the controller and the project is
downloaded.
Once the project has successfully
downloaded to the controller, if the
Module Properties window for the drive
is open, a connection is made with the
drive.
3. Put the controller in REM mode and
change the controller project to Remote
Run mode.
IMPORTANT If a fault message appears on your
PowerFlex 525 drive, press
on the keypad to clear the fault.