Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start User Manual
Page 29
Advertising
![background image](/manuals/581574/29/background.png)
Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
29
Add a PowerFlex 525 Drive to a Controller Project Chapter 2
6.
In the drive output tags, change the
CommandedFreq tag to 15000
engineering units (this is approximately
59.5 Hz).
7.
Change the Start tag to 1.
The display on the drive registers the
speed increase in Hz until the value
entered at the reference tag is reached.
8.
Change the Start tag back to 0.
WARNING: If there is a motor attached to your drive, completing the next step causes the motor to turn.
Advertising