Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 14)

14 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
Chapter 1 Prepare the PowerFlex 525 Drive Hardware
• For frame A dives, press down and pull out on the top cover of the control module, then hold the sides
and pull the control module out of the power module.
2. Press and hold down the locking tab on the terminal guard, and slide the terminal guard down to remove
from the power module.
Press Down on Tab and
Pull Out on Cover
Hold Sides of Control
Module and Pull Out
Control Module
Power Module
Press and
Hold Down
Locking Tab
Slide Terminal
Guard Down