Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 6)

6 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
Preface
Prepare the computer Installing the necessary software on your computer, for example, RSLogix 5000 software or Logix Designer application.
Configure the networks Completing required tasks associated with the networks used in your application, such as assigning an IP address to the
controller’s communication port or communication module in your Logix5000 control system.
Create a controller
project Creating a project used with and stored in your Logix5000 controller that includes all desired control system components
and necessary programming, for example, adding ladder logic to test tasks associated with individual system components.
Table 1 - Required Tasks to Complete before Using This Quick Start (continued)
Task Description