Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 26)

26 Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013
Chapter 2 Add a PowerFlex 525 Drive to a Controller Project
Edit the Drive Parameters
1. If necessary, open the Module Properties
dialog box for the drive and, on the Drive
tab, click Parameters in the toolbar.
The Parameter List dialog box appears.
2. To change drive parameters, click the
Value column cell for the appropriate
parameter and make a change.
Depending on the Value cell, choose the
appropriate value from pull-down menu
or type your value.