Rockwell Automation Logix5000 Control Systems: Connect PowerFlex 525 Drives over EtherNet/IP Quick Start - Manual (Page 17)

Rockwell Automation Publication IASIMP-QS036A-EN-P - April 2013 17
Prepare the PowerFlex 525 Drive Hardware Chapter 1
6. From the Tools menu, choose Network
Settings.
7. Type the Subnet Mask of the network.
The Gateway address, Primary and/or
Secondary DNS address, and Domain
Name fields are optional.
8. Click OK.
The Request History panel appears with the hardware addresses of all devices issuing BOOTP requests.
9. Select the appropriate device, that is, the
device with the MAC ID that matches
your PowerFlex 525 drive.
10. Click Add to Relation List.
The New Entry dialog box appears.
11. Type an IP Address, Hostname, and
Description for the adapter.
12. Click OK.