Rockwell Automation FlexPak 3000 DC Drive Version 4.3 - Manual (Page 13)

Introduction to the FlexPak 3000 Drive 1-5
1.7 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance, call
864-284-5444.
Dynamic Braking Kit Provides the hardware, including braking grids,
needed to provide dynamic braking on stop. 908FK,
909FK,
912FK, and
913FK series D2-3313 or
D2-3374
Enhanced Field
Supply Kit Provides electronic field trim, field economy, and
the ability to supply 240V field voltage and other
special voltages. This kit replaces the standard
field supply. 923FK series D2-3413
Field Current
Regulator Kit Provides field economy, as well as pre-
weakening of the field using a fixed reference or
field weakening for above base speed operation.
Tachometer feedback is required with this kit.
This kit replaces the standard field supply. 911FK series D2-3336
I/O Expansion Board Mounts on the FlexPak 3000 chassis and gives
the FlexPak 3000 additional analog, frequency,
and digital I/O capability. 914FK0101 D2-3301
Inverting Fault Circuit
Breaker Kit This kit is an alternative to drives supplied with
inverting fault fuses. 906FK series D2-3300 or
D2-3330
NEMA 1 Conversion
Kit Converts the standard chassis to a NEMA 1
enclosure. 904FK series D2-3299 or
D2-3331
Operator Interface
Module (OIM) Remote
Mounting Kit Allows mounting of the OIM up to five meters
from the drive. 905FK0101 D2-3294
Pulse Encoder
Feedback Kit Allows for digital pulse encoder speed feedback. 907FK0101 D2-3302
Table 1.1 – Drive Modification Kits
Name Description
Model
Number I/M Number