Rockwell Automation FlexPak 3000 DC Drive Version 4.3 - Manual (Page 82)

B-10 FlexPak 3000 DC Drive Hardware Reference Version 4.3
Figure B.8 – Proper Termination of Screened Cables with a Termination Fitting
Figure B.9 – Proper Termination of Screened Cables with a Termination Bracket
When using a conduit termination fitting to terminate the screen or rigid conduit, the
area around the entry hold must be free of paint and protected from corrosion.
System ground must be extended to all connected enclosures and components by
running a ground conductor with the power and signal conductors to these enclosures
and components, as shown in figure B.10. Follow the electrical cabinet guidelines
described in this appendix for all remote electrical enclosures.