Rockwell Automation FlexPak 3000 DC Drive Version 4.3 - Manual (Page 71)

Technical Specifications A-5
Table A.10 – Analog Inputs
Manual Mode Reference
Potentiometer
External Voltage Source
5 K
Ω
minimum
±10 VDC (when used for analog trim reference)
0 to 10 VDC (when used for manual mode speed
reference)
Automatic Mode
Voltage Reference
Current Reference
±10 VDC
4 to 20 mA or 10 to 50 mA
Analog Tachometer Feedback
Tach Voltage at Top Speed
10 to 250 VDC
Table A.11 – Analog Outputs
Output Voltage ±10 VDC
Maximum Load 4 mA