Rockwell Automation FlexPak Plus DC Drive - Manual (Page 21)

3:11
28
20
126
426
BUFFER
28
20
126
26
BUFFER BOARD
B/M0Ć57005
REGULATOR BOARD
B/M0Ć57100
J4
LVTU
MIN SPEED (P1)
Common
MAX SPEED (P2)
+11.2v
326 326
ADD JUMPER FROM
326 TO 426 ON THE
BUFFER BOARD
Common
26
326
57
BUFFER
J1
+
-
FOLLOWER
REFERENCE
INPUT
TYPICAL REFERENCE KIT
Figure 3Ć9. Reference Circuit for Follower Reference Kit without the use of the
Manual Operator's Reference Option.
In this configuration (see Figure
3Ć9), the J1 jumper on the
Reference Kit Board is to be cut and
a jumper added between terminals
326 and 426 of the Buffer Board.
This inserts the reference signal
through the reference buffer circuit
to pin 26 of the Regulator Board.
The J4 jumper on the Regulator
Board is not to be removed in this
configuration (see Figure 3Ć9).