Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 200)

200 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 7 PowerFlex 700AFE Drive - Frame 10 Procedures
7. Remove the four M5 x 10 mm POZIDRIV screws that secure the fan
inverter to the power structure.
8. Remove the cable-ties that secure the cables with black insulation to the
power structure frame and remove the fan inverter assembly from the
power structure.
9. Install the AC fan inverter assembly in the reverse order of removal.
Fan Inverter
7
Wire harness is
attached to frame with
two cable ties.
PZ2
3.5 N
• m (31.0 lb • in)
Inverter Sections
Remove cable ties