Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 66)

66 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 2 PowerFlex 700H and 700S Drives - Frame 10 Procedures
8. For the right-side fan power supply, disconnect the cables from connectors
X2 and X8.
9. For the left-side fan power supply, disconnect the cables from connectors
X2, X8, and X3.
10. Carefully remove the fan power supply assemblies by pulling them out of
the front of the drive.
X3 (jumper installed)
Right-side AC fan power supply
X8
X2
Note: Series A capacitor shown
Right-side DC fan power supply