Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 223)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 223
PowerFlex 700AFE Drive - Frame 10 Procedures Chapter 7
7. Remove the X1 cable from the sheet metal fan housing.
8. Disconnect the cable from X51 on the LCL filter fan power supply and X3
on the AFE power unit and discard the cable.
9. Connect the new cable to X51 on the LCL filter fan power supply and X3
on the AFE power module. The extra flying lead connects to the –DC bus
terminal as shown here.
7 Image for SK-Y1-DCPS2-F10