Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 97)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 97
PowerFlex 700H and 700S Drives - Frame 11 Procedures Chapter 3
7. Remove the two M5 x 10 mm POZIDRIV screws that secure the fan
power supply assembly to the front of the drive. Tightening torque for
reassembly is 1.9 N
• m (16.8 lb • in).
8. Disconnect the fan motor cable from the bottom of the fan power supply
assembly.
9. Remove the four M5 x 10 mm POZIDRIV screws that secure the bottom
of the fan power supply assembly to the drive frame.
9
9
9
8
PZ2
2.3 N
• m (20.4 lb • in)
All Screws:
7