Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 213)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 213
PowerFlex 700AFE Drive - Frame 10 Procedures Chapter 7
9. Cut the tie wraps that secure the fan cable to the sheet metal housing.
10. Remove the grommets from the holes in the sheet metal.
11. Remove the four M5 x 10 POZIDRIV screws that secure the fan to the
sheet metal housing and remove the fan. Retain the sheet metal housing
for reuse.
12. Install the new main DC fan in reverse order. Verify that the fan turns
easily and does not make contact with the sheet metal housing or fan cable
before installing the fan assembly in the drive.
11