Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 42)

42 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 1 PowerFlex 700H and 700S Drives - Frame 9 Procedures
15. Insert the DC fan inverter assembly into the fan inverter compartment and
secure the assembly to the drive using the two M4 x 8 mm POZIDRIV
screws.
16. Connect the stirring fan power wires.
17. Connect the DC supply wire from fan inverter connector X2.
18. Connect the fan supply wire from fan inverter connector X8.
19. Connect the DC fan power supply wire from connector X81
20. Connect the four fuse power wires (black and red pairs) from the top and
bottom of the fuse holder.
PZ2
2.3 N
• m (20.4 lb • in)
16
17
18
20
19